Measurement of the plasma and neutral gas flow velocities in a low-pressure hollow-cathode plasma jet sputtering system
Abstract
We present results from two mutually independent measurements of plasma and neutral gas flow velocities in a plasma jet deposition system. Operation of a hollow-cathode discharge within the plasma jet nozzle in the pulse regime enables the simple use of a classical Langmuir probe for the plasma flow velocity measurement.
In this method, we assume that the plasma is generated solely inside the nozzle during the power impulse and we measure the time of flight of the ions along a known distance between the nozzle end and the probe. The plasma velocity at the plasma jet axis is then determined by differentiation of the dependence of the distance covered by ions on time.
As the second method the well-known Pitot tube is used for measurement of the neutral gas velocity. By comparison of both methods we have experimentally proved that the neutral gas flow velocity is almost unaffected by the presence of the plasma, i.e. it does not substantially depend on whether the discharge is switched on or off.
The results of both methods correspond well; detected differences are qualitatively explained. It is documented that the plasma jet can be operated both in a subsonic and in a supersonic regime.
We present the dependences of the plasma and neutral gas flow velocity on the distance from the cathode, on the pressure in the reactor chamber, and on the flow rate of the working gas.