Abstract
In the present study, inflation tests with free axial extension of 15 human vena saphena magna were conducted ex vivo to obtain data suitable for multi-axial constitutive modeling at overloading conditions (pressures up to approximately 15 kPa). Subsequently the data were fitted with a hyperelastic, nonlinear and anisotropic constitutive model based on the theory of the closed thick-walled tube.
It was observed that initial highly deformable behavior (up to approximately 2.5 kPa) in the pressure-circumferential stretch response is followed by progressive large strain stiffening. Contrary to that, samples were much stiffer in longitudinal direction, where the observed stretches were in the range 0.98-1.03 during the entire pressurization in most cases.
The effect of possible residual stress was evaluated in a simulation of the intramural stress distribution with the opening angle prescribed to 0 degrees, 10 degrees, 20 degrees, 30 degrees, 40 degrees, and 50 degrees. The result suggests that the optimal opening angle making the stress distribution through the wall thickness uniform is about 40 degrees.
The material parameters presented here are suitable for use in mechanobiological simulations describing the adaptation of the autologous vein wall after bypass surgery.