Charge collection and field profile studies of heavily irradiated strip sensors for the ATLAS inner tracker upgrade
Abstrakt
The ATLAS group has evaluated the charge collection in silicon microstrip sensors irradiated up to a fluence of 1 x 10(16) n(eq)/cm(2), exceeding the maximum of 1.6 x 10(15) n(eq)/cm(2) expected for the strip tracker during the high luminosity LHC (HL-LHC) period including a safety factor of 2. The ATLASI2, n(+) -on-p type sensor, which is fabricated by Hamamatsu Photonics (HPK) on float zone (FZ) substrates, is the latest barrel sensor prototype.
The charge collection from the irradiated 1 x 1 cm(2) barrel test sensors has been evaluated systematically using penetrating p-rays and an Alibava readout system. The data obtained at different measurement sites are compared with each other and with the results obtained from the previous ATLAS07 design.
The results are very consistent, in particular, when the deposit charge is normalized by the sensor's active thickness derived from the edge transient current technique (edge-TCT) measurements. The measurements obtained using beta-rays are verified to be consistent with the measurements using an electron beam.
The edge-TCT is also effective for evaluating the field profiles across the depth. The differences between the irradiated ATLAS07 and ATLASI2 samples have been examined along with the differences among the samples irradiated with different radiation sources: neutrons, protons, and pions.
The studies of the bulk properties of the devices show that the devices can yield a sufficiently large signal for the expected fluence range in the HL-LHC, thereby acting as precision tracking sensors.