Charles Explorer logo
🇨🇿

Interface of a Al6061/Ti Composite Prepared by Field Assisted Sintering Technique

Publikace na Matematicko-fyzikální fakulta |
2021

Tento text není v aktuálním jazyce dostupný. Zobrazuje se verze "en".Abstrakt

Architectured heterogeneous metallic composites consist of two dissimilar materials with a particular focus on spatial arrangement of constituents. This experimental study describes the application of Field Assisted Sintering Technique (FAST) for manufacturing of composite materials by sintering of a bulk reinforcement with a powder metal.

Simple structure made of Ti wire (Ti Grade 2) was sintered with Al6061 alloy powder at 560 degrees C for 10 min. Successful material bonding and evolution of diffusion layer was thoroughly studied by scanning and transmission electron microscopy.

Diffusion layer and adjacent precipitates are described as ternary Ti-Al-Si tau(1) and tau(2) phases. Si, as an alloying element in the Al6061 alloy, significantly affects the formation of the diffusion layer at the material interface due to its high inter-diffusion coefficient in both Al and Ti.

Detailed TEM analysis also showed a modulated tau(1)/tau(2) structure resembling a long-period stacking order (LPSO) phase, which has not been previously reported in the Ti-Al-Si ternary compounds. FAST is capable to manufacture composites from dissimilar constituents, which opens new possibilities for design and manufacturing of architectured materials.