Charles Explorer logo
🇨🇿

C-doped TiO2 nanotubes with pulsed laser deposited Bi2O3 films for photovoltaic application

Publikace na Matematicko-fyzikální fakulta |
2022

Tento text není v aktuálním jazyce dostupný. Zobrazuje se verze "en".Abstrakt

Anodization was used to obtain a nanotubular TiO2 photoanode on F-SnO2 glass. Subsequent annealing in the CH4 atmosphere promoted the C-doping and improved the crystallinity of the TiO2 nanotubes.

The pulsed laser deposition was applied to cover the nanotubes with Bi2O3, serving as a hole transport material. X-ray photoelectron spectroscopy analyses of the doped samples reveal a shift in the valence band's maximum position towards lower binding energy as compared to those observed for the undoped samples (annealed in the air).

The doping positively affects the absorption by shifting the absorption edge to 567 nm. I-V measurements under illumination show that the C-doping of TiO2 increases the current density following the absorbance results.

The highest open circuit voltage was reached for the samples with the 300 degrees C-deposited Bi2O3 layer, pointing to better quality of the p-n junction, hence of the contact between Bi2O3 and TiO2. This in situ annealing provided the formation of close contact between Bi2O3 and TiO2, which enabled a faster charge transport as compared to the contact obtained with no annealing or even with post annealing.

Klíčová slova